35
Reading the Display
Mode of analysis
Indicates the condition of the display screen.
Measurement time/Total measurement time
When the store mode is Manual, the measurement time is displayed.
When the store mode is Auto, the total measurement time is displayed
Comparator
Display when comparator is set (see page 53)
Operation/measurement elapsed time
Shows the elapsed time from the start of measurement.
SD memory card insertion indicator
Shown when an SD memory card is inserted in the unit (see page 23).
SD memory card remaining capacity
Shows the remaining capacity of an inserted SD memory card.
Note
Even when a new SD memory card is inserted, the
remaining capacity may sometimes be shown as 99%
rather than 100%.
Inst. store interval
When the store mode is Auto or Timer Auto, the Inst. store interval is
displayed (see page 51).
Current date and time
Shows the current date and time.
Calculation interval
When the store mode is Auto or Timer Auto, the Calculation interval is
displayed (see page 51).
Setting of output, etc
The selected output signal on the [OUTPUT] of the [Display / I/O] screen
is shown here (see page 53).
To Next Page
Loading...
