38
Reading the Display
Measurement in progress symbol
When a measurement is in progress, the symbol ashes. The indicator
LED also ashes in red.
During auto store, the
symbol also ashes. The indicator LED ashes
in red.
During measurement standby, the symbol is shown. The indicator LED
ashes in blue once every 5 seconds.
During measurement pause, the symbol is shown. The indicator LED
ashes in blue.
Channel
Shows the selected channel.
Delay time
Shows the delayed measurement time set by “Delay Time”.
Address
Shows the current memory address. In manual store mode, the indication
is red if there are data in that address.
Store mode
Shows the selected mode for storing data in memory (Manual, Auto, or
Timer Auto) (see page 66).
To Next Page
Loading...
