Rion VM-56 - Page 63

51
Reading the Display
Total Measurement Time (Auto mode)
Displays the screen to select the total measurement time in the auto mode.
Select [Total Measurement Time] and press the MENU/ENTER key. The
total measurement time screen appears.
User setting (Manual mode and Auto mode)
When [Manual] is selected from [Measurement Time] of the Manual mode
or [Total Measurement Time] of the Auto mode, the user setting items
will be displayed and measurement time can be set arbitrarily.
The maximum settable time is 24 hours with the Manual mode. In Auto
mode, the maximum settable time is 41 days when “Inst store 100 ms” is
ON, and 200 days when it is OFF.
Inst. Store Interval (Auto mode and Timer Auto mode)
Displays the screen to select the Inst. store interval in the Auto mode or
Timer Auto mode.
Select [Inst. Store Interval] and press the MENU/ENTER key. The Inst.
store interval screen appears.
Calculation Interval (Auto mode and Timer Auto mode)
Displays the screen to select the calculation interval in the Auto mode or
Timer Auto mode.
Select [Calculation Interval] and press the MENU/ENTER key. The cal-
culation interval screen appears.
Timer Auto Start (Timer Auto mode)
Displays the screen to set the measurement start time in the Timer Auto
mode.
Select [Start] and press the MENU/ENTER key. The start time setting
screen appears.
When the start time setting screen is displayed for the  rst time, the time
after 5 minutes from current time is indicated.