Rion VM-56 - Page 66

54
Reading the Display
Communication Interface
Displays the screen to select a type of communication with a computer
or printer to be connected to the unit.
Select [Communication Interface] and press the MENU/ENTER key. The
communication interface screen appears.
Use the
keys to select the communication type (OFF, USB, RS-232C)
and press the MENU/ENTER key.
Baud rate
Displays the screen to select the baud rate value when [Communication
Interface] is set to “RS-232C”.
Select [Baud rate] and press the MENU/ENTER key. The baud rate screen
appears.
Use the keys to select the baud rate value (38400 bps, 57600 bps,
115200 bps) and press the MENU/ENTER key.
Flow control
Displays the screen to select the baud rate value when [Communication
Interface] is set to “RS-232C”.
Select [Flow control] and press the MENU/ENTER key. The  ow control
screen appears.
Use the keys to select the  ow control type (OFF, HARD, SOFT)
and press the MENU/ENTER key.