Rion VM-56 - Page 72

60
Reading the Display
MENU list items
System
Read/Save Setup File [v]--------Load Default Settings
Internal Memory---- List of setting groups on internal memory
SD---- Startup File
Clock Settings
Backlight/LCD Settings [v]-----Backlight Auto Off
Backlight brightness
LCD Auto Off (Auto Store)
Battery Type---- Alkaline / Ni-MH
Card Format
Index
Program Information [v]--------Model, Version
Eco Setting
Store
Store Mode----Manual / Auto/ Timer Auto
Manual----Store Name*
2
, Measurement Time
Auto----Store Name, Total Measurement Time, Inst Store Interval,
Calculation Interval
Timer Auto----Store Name, Inst Store Interval, Calculation Interval,
Timer Auto Start, Timer Auto Stop, Timer Auto Interval, Sleep Mode
Display / I/O
Timer-Level graph Time scale ----20s, 1min, 2min
Output [v]----Output OFF/ON
Comparator [v]----OFF, 1, 2, 3, 4, 5, 6
Communication Interface---- OFF, USB, RS-232C
Save
Screenshot(BMP)
Option
Measure (General)
Freq. Weighting for Acc. X-axis [v]----Wm, Wb, Wd, Non-Weighting
Freq. Weighting for Acc. Y-axis [v]----Wm, Wb, Wd, Non-Weighting
Freq. Weighting for Acc. Z-axis [v]----Wm, Wb, Wd, Non-Weighting
Non-Weighting Freq. Band Freq. *
3
Lower limit---- 0.5Hz, 1Hz, 4Hz
Upper limit---- 80Hz, 100Hz, 250Hz, Sensor dependent
Freq. Range for Vel. and Disp. (Building Damage)
Lower limit---- 0.5Hz, 1Hz, 4Hz
Upper limit---- 80Hz, 100Hz, 250Hz, Sensor dependent
Freq. Range for Vel. (Human Exposure)
Lower limit---- 0.5Hz, 1Hz, 4Hz
Upper limit---- 80Hz, 100Hz, 250Hz, Sensor dependent
Dominant Frequency Line ---- No line, line1, line2, line3
Delay Time--- OFF, 10s
Standard---- General, SBR
Measure (SBR)
Freq. Range for Acc.
Lower limit---- 0.5Hz, 1Hz, 4Hz
Upper limit---- 80Hz, 100Hz, 250Hz, Sensor dependent
Freq. range for Vel. and Disp. (Building Damage)
Lower limit---- 1Hz *
4
Upper limit---- 100Hz *
4
Freq. range for Vel. (Human Exposure)
Lower limit---- 1Hz *
4
Upper limit---- 80Hz *
4
Dominant Frequency Line ---- No line, line1, line2, line3
Delay Time--- OFF, 10s
Standard---- General, SBR
Recall
Recall data list
WR
*
5
*
1: ------: Items displayed when proceeding to next menu level
*
2: When SD memory card is inserted
*
3: When Non-Weighting is selected in one of Freq. Weighting for Acc. X-axis, Y-axis, or Z-axis
*
4: SBR mode is a xed value.
*
5: When optional VX-56WR is installed