Rion VM-56 - Page 91

79
Setup Files
Loading a setup  le
Note
When you load settings from a  le, the current settings
will be overwritten. If necessary, you should save the
current settings before loading a new set of settings.
1. Use the
keys to select [System] and press the MENU/
ENTER key. The system screen appears.
2. Use the
keys to select [Read/Save setting] and press the MENU/
ENTER key. The setting operation screen appears.
3. Use the
keys to select the desired number and press the MENU/
ENTER key. The setting  le processing screen appears.
4. Use the keys to select [Load the setting] and press the MENU/
ENTER key. The con rmation screen appears.
5. Use the
keys to select [Yes] and press the MENU/ENTER key.
The  le contents of the selected number will be re ected to the setting
of the unit.
Deleting a setup  le
1. Use the keys to select [System] and press the MENU/
ENTER key. The system screen appears.
2. Use the
keys to select [Read/Save setting] and press the MENU/
ENTER key. The setting operation screen appears.
3. Use the
keys to select the desired number and press the MENU/
ENTER key. The setting  le processing screen appears.
4. Use the
keys to select [Delete] and press the MENU/ENTER
key. The con rmation screen appears.
5. Use the
keys to select [Yes] and press the MENU/ENTER key.
The  le of selected number is deleted.