SteelFusion Edge Hardware and Maintenance Guide
101
Controlling the Power Monitoring and Managing the Appliances with BMC
4. Restart your browser to begin using the new certificate.
You can view the certificate details in the View SSL tab.
Controlling the Power
You can reboot or restart the appliance from the BMC. The page also shows the current status of the
appliance.
To reboot, restart, or power on the appliance
1. Choose Remote Control > Server Power Control.
2. Select one of the following power control options:
– Reset Server - Reboot the system without powering off (warm boot).
– Power Off Server - Immediate - Immediately power off the SteelHead.
– Power Off Server - Orderly Shutdown - Shut down the operating system and then power off the
SteelHead.
– Power On Server - Select this option to power on the SteelHead.
– Power Cycle Server - Power off and then reboot the appliance (cold boot).
– Power Button
3. Click Perform Action.
Changing the BMC administrator password
The System Administrator page lets you change the BMC password.
To change the BMC administrator password
1. Choose Maintenance > System Administrator.
2. Select Change Password.
3. Enter and confirm the new password.
The password must be between 8 and 64 characters and it cannot contain spaces.
4. Click Save.
To Next Page
Loading...