C2 User Manual, Release 1.0.0
7.9 Connecting your printer to wifi
If you want to connect your printer to a wifi network, or change the wifi network through the Robo app, there are a
few steps to take.
1. First, make sure your iOS device is connected to the same signal as your printers wifi signal. If the printer is in
hotspot mode, connect your iOS device to that same network.
2. Now, go into the Robo app and go to your dashboard.
3. Look for the printer you would like to connect to a local wifi network.
4. Swipe left on the printer name from the dashboard screen, and click the ‘wifi’ button that is shown.
116 Chapter 7. Robo App for iOS
To Next Page
Loading...
