C2 User Manual, Release 1.0.0
6.8 Manage plugins
Plug-ins are a great way to add functionality to your Robo C2 and Robo R2. There a several plugins that make the
entire experience of using your 3d printer easy and accessible. You can manage all of your plug-ins from the web
dashboard by going to the ‘settings’ button in the top right of the main interface. A ‘settings’ pop up window will
show up, where you can locate the ‘plugin manager’ on the left hand menu about half way down. There are many
plugins installed on your printer, but here are explained a few essential ones that are made to make the experience
better;
EEPROM Marlin Editor Plugin
• The EEPROM Marlin Editor Plugin allows the user to pull the EEprom setting directly through the web dash-
board. This plugin also directly talks to the Robo C2 and Robo R2 LCD screen and translates the information
quickly and accurately.
Filament Sensor
• The filament sensor plugin has been designed to take an input from a sensor located in the filament bracket, and
output that signal to the on-board computer. If it realizes there is no filament loaded in the filament bracket, it
will pause the print and show a pop-up on the screen to let you know to add more filament before proceeding.
Lani
• The Lani plugin enables Robo C2 and Robo R2 to be remote monitored with admin access through
the Lani platform www.lanilabs.com.
How to view the Lani plugin
6.8. Manage plugins 89
To Next Page
Loading...
