ROBO C2 - Downloading the Robo App; Connecting Your Ios Device to Your Robo C2

C2 User Manual, Release 1.0.0
Your printer is capable of starting If no Wi-Fi signals are available for connection, you can use Hotspot Mode to emit
a Wi-Fi signal from Robo C2 in order to connect to it wirelessly from your smart device. To access Hotspot Mode, do
the following:
Hotspot Mode
1. Select “Utilities” on the home screen of the Robo C2 touch screen
2. Select “Network” from the list
3. Select “Start Hotspot Mode” from the list
4. Your Robo C2 is now casting it’s own wireless network
2.9 Downloading the Robo App
From your iOS Device
1. Open the App Store app
2. On the bottom dock, tap on search
3. Enter “Robo 3D”
4. Tap on the Robo 3D app
5. Tap download on the right of the icon, and rate us 5 stars if you like it!
2.10 Connecting your iOS device to your Robo C2
Connecting via a local wifi network
2.9. Downloading the Robo App 25