Robopac MASTERWRAP PLUS XL FR - Page 83

ENG
INFORMATION ABOUT THE USE
83
Activation
mode
abbreviation
Button
Description
P
Press the “Start logging mode” button (1) to access the logging mode.
Set the arm rotation speed, the carriage upstroke/downstroke speed and the film
stretch as previously indicated in programmes from 1 to 6.
Once any of these control buttons has been pressed, these values can no longer be
modified.
Activation
mode
abbreviation
Button
Description
R
Arm rotation speed
Carriage movement speed
Film stretch (for FR-PGS version only)
Carriage downstroke Start/Stop
Carriage upstroke Start/Stop
Cycle pause
Arm stop in initial position
Arm rotation start.