Robopac MASTERWRAP PLUS XL FR

To Next Page

To Previous Page

INFORMATION ABOUT THE USE

ENG

Activation

mode

abbreviation

Button

Description

When the button is pressed, the arm starts to turn.

Use the buttons to perform the required movements.

Press the jog button to confirm the selected control.

Press the “STOP” button to end the logging.

Main Page

Table of Contents3
General Information5
Purpose of the Manual5
Manufacturer and Machine Identification6
Terms and Definitions7
Pictograms Indicating Danger8
Pictograms Indicating Prohibition9
Pictograms Indicating Obligation10
How to Request Assistance11
Attached Documentation11
How to Read the Instructions for Use11
Safety Information12
General Safety Warnings12
Safety Warnings for Handling and Installation13
Safety Warnings for Use and Operation14
Safety Warnings Related to Misuse15
Reasonably Foreseeable Misuse15
Employer Obligations15
Safety Warnings on Residual Risks16
Safety Warnings for Adjustments and Maintenance18
Safety Warning for the Electrical Equipment18
Information and Safety Signs19
Perimeter Areas20
Technical Information21
Machine General Description21
Machine Models Description23
Description of the Operation Cycle23
Safety Device Description24
Description of Electrical Devices25
Description of Accessories on Request26
Technical Specifications29
Spool Features30
Machine Dimensions31
Noise Level32
Installation Environment Characteristics32
Information on Handling and Installation33
Recommendations for Handling and Loading33
Packing and Unpacking34
Transport and Handling36
Installation of the Machine38
Front Stop Device Installation (Optional)42
Longitudinal Stop Device Installation (Optional)42
Work Area Delimitation Barrier Installation (Optional)43
Installation of Stop Device for Roll Container (Optional)44
Positioning of Template for Work Area Drawing (Optional)45
Mobile Base Installation (Optional)45
Pallet Lifting Frame Installation (Optional)46
Recommendations for Connections47
Electrical Connection47
Information on Adjustments48
Recommendations for Adjustments48
Film Stretch" Adjustment49
Spool Carriages of "Frd" Type49
Reel Brake Adjustment49
Wrapping Machine Arm Drive Chain Tension Adjustment50
Film Carriage Belt Adjustment51
Information about the Use52
Recommendations for Operation and Use52
Description of Controls (Ecowrap Plus)53
Machine Functions (Ecowrap Plus)55
Multi-Function Selector Usage Mode (Ecowrap Plus)58
Turning the Machine on and off (Ecowrap Plus)60
Cycle Start and Stop (Ecowrap Plus)61
Emergency Stop and Restart (Ecowrap Plus)62
Description of Controls (Masterwrap Plus)63
Description of User Interface (Masterwrap Plus)65
Main Menu" Page66
Wrapping Cycle67
ARM ROTATION SPEED (Rpm)68
Carriage Speed69
Wrapping End Delay / Pallet Height70
Manual Controls71
Film Tensioning72
Other73
Settings74
Recipe78
Manual Cycle80
Eco Cycle82
Miscellaneous85
Turning the Machine on and off (Masterwrap Plus)86
Cycle Parameters Setting86
Description of the Wrapping Cycles87
Single Wrapping Cycle87
Double Wrapping Cycle87
Wrapping Cycle with Feeder88
Cycle Start and Stop (Masterwrap Plus)89
Information Valid Only for "Feeder Cycle" Wrapping Mode89
Emergency Stop and Restart (Masterwrap Plus)90
Spool Loading91
Maintenance Information93
Recommendations for Maintenance93
Periodical Maintenance Intervals94
Lubrication Point Diagram96
Lubricant Table97
Fault Information98
Alarm Messages98
Alarm List (Ecowrap Plus)98
Alarm List (Masterwrap Plus)99
Problem List (Ecowrap Plus - Masterwrap Plus)100
Replacement Information102
Recommendations for Replacing Machine Parts102
Recommended Spare Parts List103
Machine Decommissioning and Scrapping103
Machine Decommissioning103
Machine Scrapping103
Annexes104
Warranty Conditions104

Robopac MASTERWRAP PLUS XL FR - Page 84

Table of Contents

Related product manuals