Roche 9180 - Testing the Language Switch; Testing the Sample Door

Roche Diagnostics
Instructions for Use · Version 10.0 161
9180 Electrolyte Analyzer 10 Troubleshooting
Service functions
o Press NO to exit or to perform other service functions.
Testing the language switch
o Press NO until Test Language Switch? is displayed.
o Press YES and the current language switch status will be displayed.
o Open the front door and remove the printer paper tray.
o Change the language settings with a pen.
q
To activate a new language setting, turn off the analyzer and back on.
o Press NO to exit or to perform other service functions.
Figure 10-1
Testing the sample door
o Press NO until Test Sample Door? is displayed.
o Press YES and the current status will be displayed:
Sample Door: C
C=closed O=open
o Open the sample door to see status changes.
o Press NO to exit or to perform other service functions.
Polski
Português
Spare 3
Spare 4
English
Deutsch
Français
Español
Italiano
ᣣᧄ⺆