Rockwell Automation Publication 1426-UM001J-EN-P - August 2019 43
Install the PowerMonitor 5000 Unit Chapter 2
Browse the PowerMonitor 5000 Web Page by Using the USB Connection
Follow these steps to browse the PowerMonitor 5000 unit.
1. Open the Internet Explorer web browser on the computer and browse to
the url http://192.168.169.3.
The PowerMonitor 5000 web page displays in your browser.
By default the security setting of the power monitor web page is disabled.
2. To enable security, see Configure Initial Security on page 56
for more
information.
IMPORTANT
Your browser must have Allow Scriptlets set to Enable for the applicable security zone for
configuration changes to be made to the power monitor by using the web page.
To Next Page
Loading...
