Operating the Instrument
R&S
®
RTO
74Getting Started 1316.0833.02 ─ 10
To arrange the diagrams on the screen, the Rohde & Schwarz SmartGrid function
helps you to find the target place simply and quickly. A tabbed view is also possible,
and you can adjust the diagram size.
For details, see "To arrange a waveform using the SmartGrid" on page 84.
Grid
The grid shows the vertical and horizontal divisions. The division lines are labeled with
the correspondent values. The grid labels have the color of the waveform to which they
belong. If several waveforms are shown in one diagram, the grid has the color of the
selected waveform.
Horizontal and trigger labels
The horizontal and trigger labels on the signal bar show the current time base and trig-
ger settings. If you tap a label, the relevant dialog box opens with the tab used at last.
Res
= Resolution / sample rate
RL = Record length
RL (right) = RT - real time, IT - interpolated time
Scl = Timebase, horizontal scale
Pos = Horizontal position
Auto | Normal = Trigger mode
A = Trigger type, slope, and source of the A-event
Lvl = Trigger level
Signal icons on the signal bar
Each waveform is represented by a signal icon. For an active waveform, which is
shown in a diagram, the signal icon displays the signal label with the main vertical and
acquisition settings for the waveform. The icon can also display a signal view, that is
the minimized live waveform.
Pos
= Vertical position
Off = Offset
Scl = Vertical scale
Cpl = Coupling
TA = Waveform Arithmetic
Dec = Decimation
Bw = Bandwidth
You can place the signal bar on the left or right side of the screen, hide it, and change
the color and transparency of the bar.
Information on the Display
To Next Page
Loading...
