Roland JUPITER-X Reference Manual

55
Q&A
23 Can I edit from the initialized sound of a
model?
Yes.
Initialize the tone as follows.
1. Press the [SCENE] button, and then press the [WRITE]
button.
2. Use the [1] or [2] knob to select “TONE INITIALIZE.”
3. Press the [ENTER] button.
The message “INITIALIZE TONE Are you sure?” appears.
4. Press the [ENTER] button to execute initialization.
You return to the WRITE MENU screen.
* The initialized sound and settings dier depending on the model.
* Depending on the scene settings, the sound of multiple parts might be
layered, or the part parameter settings might not produce the sound
that you expect. In this case, you should rst initialize the scene (SCENE
INITIALIZE) before initializing the tone.
24 What is the dierence between the VINTAGE
FILTER [R] [M] [S] buttons?
[R]: This is the lter of the original Roland model, and is selected by
default.
[M] [S]: These model the lters of vintage synthesizers made by other
companies.
When a vintage type model is selected, you can use the VINTAGE
FILTER [R] [M] [S] buttons to change the lter type.
Eect
25 Is there a way to quickly turn o the eect such
as reverb or delay?
Yes.
For presets and factory-set scenes, the [S1] button is assigned to turn
“scene delay” on/o, and the [S2] button is assigned to turn “scene
reverb” on/o. Each time you press the button, the delay or reverb for
all parts turns on/o.
If the delay sound remains even after you make the [S1] button go
dark, it could be that delay is specied for the part’s MFX. Hold down
the [SHIFT] button and turn the [MFX] knob to access the setting
screen, and turn the Switch “OFF.”
26 Which parameters are associated with the
knobs of the eect section?
This varies depending on settings such as SCENE PART EDIT: Output
and SCENE PART MFX: FllwToneMFX.
The easiest way to nd the associated parameter is to hold down the
[SHIFT] button and operate the corresponding button, so that the
associated parameter screen appears.
Arpeggio
27 What is the I-Arpeggio function?
I-Arpeggio (I-ARPEGGIO) is a new type of arpeggiator in which built-in
AI analyzes your keyboard performance and switches to the optimal
arpeggio pattern in real time.
It diers from conventional arpeggiators in the following ways.
It allows multi-part performance, and lets you freely specify the parts
to play manually and the parts played by the arpeggiator.
Depending on the type (TYPE) and rhythm (RHYTHM) that you select,
you can change the way in which the arpeggio pattern is aected by
your keyboard performance. You can also enable or disable change by
turning the PLAY DETECTOR [KEYS] and [BEAT] buttons on/o.
28 How do I use the PLAY DETECTOR [KEYS]
button and [BEAT] button?
[KEYS] button: This species whether the constituent notes of the
arpeggio performance will change according to your keyboard
playing.
For example, if you want the constituent notes that you’ve once
specied from the keyboard to remain the same while you add
additional notes from your keyboard performance, turn the [KEYS]
button o.
[BEAT] button: This species whether your performance will aect the
arpeggio pattern.
For example, if you want to change the chord without changing the
performance pattern, turn the [BEAT] button o and the [KEYS] button
on.
If KEYS and BEAT are both o, the current arpeggio performance is
kept. You can freely solo on the keyboard while that accompaniment
remains xed.

Roland JUPITER-X Specifications

Power

power supply	AC 117–240 V, 50/60 Hz
power consumption	20W

Sound and Effects

preset tones	4, 000 or greater
user tones	256
drum kits	90 or greater

Connectivity

bluetooth profile support	A2DP, GATT
headphones jacks	Stereo miniature phone type, Stereo 1/4-inch phone type
main out jacks	1/4-inch phone type, XLR type

Weight and Dimensions

width	1, 090 mm
depth	447 mm
height	119 mm
weight	16.9 kg