Output
Specifies how the sound will be output.
Range: MONO, STEREO
With a setting of “MONO,” the output sound will be
monaural.
Output Level [MULTI CTRL 3]
Specifies the output volume from the Lo-Fi effect.
Range: 0–127
Noise Generator (Add Various
Types of Noise)
In addition to a Lo-Fi effect, this effect also generates
various types of noise such as hum, pink noise, and
disc noise.
fig.7-26 (#MC fig.4-35)
Noise Type
Determines the type of noise(s) that will be generated.
Range: 1–18
Noise Level [MULTI CTRL 2]
Specifies the volume of the noise.
Range: 0–127
N Filter (Noise Filter)
Adjusts the tone of the noise.
Range: 200–8000 (Hz), BYPASS
If you do not wish to filter the noise, select “BYPASS.”
Lo-Fi Level [MULTI CTRL 1]
Increasing this setting will make the original sound
rougher.
Range: 0–127
Output Pan
Specifies the stereo location of the sound output from
the Noise Generator.
Range: L64–63R
Output Level [MULTI CTRL 3]
Specifies the output volume of the Noise Generator
effect.
Range: 0–127
Noise Type Table
Hum Hum Pink Disc
EP Disc LP
RND Disc
(50 Hz) (60 Hz)
1O
2O
3OO
4OOO
5OO
6OOO
7O
8O O
9O O O
10OOOO
11 O O O
12 O O O O
13 O
14 O O
15 O O O
16 O O O O
17 O O O
18 OOO O
For each setting, the type(s) of noise marked by “O”
will be generated.
Hum (50 Hz): hum noise (50 Hz)
Hum (60 Hz): hum noise (60 Hz)
Pink: pink noise
Disc EP: disc noise (45 RPM)
Disc LP: disc noise (33 RPM)
RND Disc: disc noise generated at random
To Next Page
Loading...
