S-Pdl Assgn (Switch Pedal Assign)
This specifies the function of a pedal (switch pedal)
connected to the SWITCH PEDAL jack.
Range:
STOP/PLAY: The pedal will act like the [STOP/
PLAY] button.
PTN INC:
(Pattern Increment) The patterns of the
currently selected pattern set will be
successively selected as the next pattern.
TRANSPOSE: The pedal will act like the [TRANS-
POSE] button.
SHIFT: The pedal will act like the [SHIFT]
button.
RPS HOLD: If you press the pedal while holding
a note to which a phrase is regis-
tered, that phrase will be held (p. 49).
TAP:
The tempo will be modified to the inter-
val at which you press the pedal (p. 46
).
S-Pdl Pol (Switch Pedal Polarity)
Select the polarity of the Switch pedal.
Range: STANDARD, REVERSE
If you are using a pedal with inverted polarity (so the
pedal functions in a way opposite from what you
expect), select “REVERSE.”
MIDI-Related Settings
1. Press [EDIT].
The indicator will light and the display will show the
Edit page.
2. Press BANK [6] (MIDI).
The MIDI setting page will appear.
3. Use PAGE [<] [>] to select parameters, and
use [INC] [DEC] or the [VALUE] dial to set
each parameter.
fig.13-7(#MC fig.15-7)
To exit the setting page, press [EXIT].
To Next Page
Loading...
