Adjusting the time over which the
pitch will change (Portamento Time)
You can adjust the time over which the pitch will
change when portamento is used.
1. In the REALTIME MODIFY section, press [FIL-
TER/AMP/PITCH] several times to make the
PITCH indicator light.
2. Rotate the [PORTAMENTO TIME] knob to set
the portamento time value.
fig.5-80 (#MC fig.3-75)
Range: 0–127
As the knob is rotated further clockwise, the pitch will
take a longer time to reach the next note. As the knob
is rotated counterclockwise, the pitch of the next note
will be reached more quickly.
Making More Detailed Settings
You can make settings that specify how the tones are
combined and how the patch will be played, etc.
1. Press NUMBER [1] (COMMON).
The display will show the COMMON setting page.
2. Use PAGE [<] [>] to select parameters and
edit them.
fig.5-81 (#MC fig.3-77)
Solo SW (Solo Switch)
By turning on the Solo switch, you can play mono-
phonically (one note at a time). It is effective to turn
Solo on when playing synth lead or synth bass sounds.
Range: OFF, ON
To Next Page
Loading...
