Playing Patterns
1. Make sure that the SEQUENCER section
[MODE] button indicator is dark.
If it is not dark, press [MODE] to make it go dark
(Pattern mode).
fig.3-1 (#MC fig.2-1)
2. Press [PTN/SONG] in the DISPLAY section.
The indicator will light.
The display will indicate the group, bank, number and
name of the currently selected pattern.
fig.3-2E
3. Press [PRESET/USER/CARD] in the GROUP
section to select the group.
Pattern groups are organized as follows.
PRESET → P:A–L (Preset group)
USER → U:A–D (User group)
CARD → C:A–D (Card group)
fig.3-3 (#MC fig.2-3)
* The card group can be selected only if an optional memory
card is inserted.
☞ “Using Memory Cards” (p. 159)
* When all three indicators of the GROUP section are dark,
TMP (the temporary pattern) is selected.
4.
Press [<PREV] [NEXT>] in the GROUP sec-
tion to select group A–L.
5. Use [INC] [DEC] or the [VALUE] dial to select
the bank and number.
Range: P:A11–P:L88, U:A11–U:D18, C:A11–C:D18
The bank, number and name in the display will
change.
A pattern has now been selected.
* P:E33–P:L88 are RPS patterns. Each pattern contains
one phrase.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Instead of using [INC] [DEC] or the [VALUE] dial,
you can also select patterns using BANK and NUM-
BER [1]–[8].
If you wish to use BANK and NUMBER [1]–[8] to
select patterns, make the [PART SELECT] and [PART
MUTE] indicators go dark.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
6. Press [STOP/PLAY] and the pattern will
play back.
fig.3-4
The pattern that is currently playing back is referred to
as the “current pattern,” and the pattern that is sched-
uled to play next is called the “next pattern.”
Immediately after a pattern is played back, the current
pattern and the next pattern will be the same pattern,
and that pattern will play back repeatedly.
7. Use steps 3–5 to select the next pattern.
The display will indicate the group, bank, number and
name of the next pattern.
When you select the next pattern, the “ ” at the left
of the pattern group will change to “ .”
fig.3-4-1E
8. When the current pattern plays to the end,
the next pattern will automatically be
selected.
9. Press [STOP/PLAY] and the pattern will
stop playing.
fig.3-5
* Immediately before the pattern changes or repeats, the fol-
lowing display will appear, notifying you that the pattern
is about to change. During this time it is not possible to
select the next pattern.
fig.3-6E
To Next Page
Loading...
