Making More Detailed Settings
1. Press NUMBER [5] (AMPLIFIER).
The display will show the AMPLIFIER setting page.
2. Use PAGE [<] [>] to select parameters and
edit them.
fig.6-25TEXT (#MC fig.3-121&122)
Tone Level (Rhythm Tone Level)
This is the setting page for “Adjusting the volume of
each rhythm tone (Rhythm Tone Level)” (p. 94).
Tone Pan (Rhythm Tone Pan)
This is the setting page for “Adjusting the pan for each
rhythm tone (Rhythm Tone Pan)” (p. 94).
Rnd Pan SW (Random Pan Switch)
This is the setting page for “Causing pan to change
randomly (Random Pan Switch)” (p. 95).
Alt Pan Dpth (Alternate Pan Depth)
This parameter causes the stereo location of the sound
to alternate between left and right each time a note is
played.
Range: L63–63R
Higher settings will cause greater change.
When this parameter is set in the L direction, the
sound will alternate in the order of left → right → left
→ right. When set in the R direction, the sound will
alternate in the order of right → left→ right → left.
Velo Sens (Amplifier Envelope Velocity
Sensitivity)
Specifies how the depth of the amplifier envelope will
be affected by the strength of your playing on the key-
board.
Range: -100–+150
With positive (+) settings, the volume will increase as
you play more strongly on the keyboard. With nega-
tive (-) settings, the volume will decrease as you play
more strongly on the keyboard.
If this is set to “0,” the volume will not be affected by
the strength of your playing on the keyboard.
If you wish to change the loudness of the notes
played on the keyboard...
☞ “Changing the Loudness of Notes Played on
the Keyboard (Keyboard Velocity)” (p. 163)
Velo Time (Amplifier Envelope Velocity
Time Sensitivity)
Specifies how the overall times of the entire amplifier
envelope will be affected by the strength of your play-
ing on the keyboard.
Range: -100–+100
With positive (+) settings, amplifier envelope times
will become faster as you play the keyboard more
strongly. With negative (-) settings, amplifier envelope
times will become slower as you play the keyboard
more strongly.
The four front panel knobs [ATTACK] / [DECAY] /
[SUSTAIN] / [RELEASE] can be used to set the most
commonly used parameters of the amplifier envelope,
but the JX-305 also allows you to make more detailed
amplifier envelope settings.
fig.5-51TEXT (=MC fig.3-125)
To Next Page
Loading...
