4. Select the part whose velocity you wish to
change.
* You may select more than one part.
5. Specify the amount that will be added to
(or subtracted from) the velocity.
Range: -99–+99
If this value is “0,” the velocity will not be modified.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
If you wish to modify the velocity of a specific range
of notes, use the keyboard to specify the range. If you
do not specify the note range, the velocity of all notes
will be modified.
fig.9-32
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
6. Press [ENTER].
The confirmation screen will appear in the display.
fig.9-33 (#MC fig.11-28)
7. Press [ENTER] once again.
The Change Velocity operation will be carried out, and
the normal display will reappear.
Modifying the Note Length
(Change Gate Time)
This operation modifies the gate time (duration) of the
notes recorded in the pattern. This can be used to
make the overall performance more staccato or tenuto.
* If this operation would result in a gate time longer than
21504 (or shorter than 1), the result will be limited to
21504 (or 1).
* It is not possible to specify the range of measures that will
be modified by this operation.
fig.9-34TEXT (=MC fig.11-29)
1. Select the pattern in which you wish to
modify the gate time.
2. Press [EDIT].
The indicator will light, and the edit page will appear
in the display.
3.
Press NUMBER [6] (CHG EVENT), and then
press PAGE [>] several times to select the
“CHG GATE” setting page.
fig.9-35 (#MC fig.11-30)
4. Select the part in which you wish to modify
the gate time.
* You may select more than one part.
5. Specify the amount that you wish to add to
(or subtract from) the gate time.
Range: -99–+99
With a setting of “0,” the gate time will not be modified.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
If you wish to modify the gate time of a specific range
of notes, you can use the keyboard to specify the
range. If you do not specify the range of notes, the gate
time of all notes will be modified.
fig.9-36
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
6. Press [ENTER].
The confirmation screen will appear in the display.
fig.9-37 (#MC fig.11-31)
7. Press [ENTER] once again.
The Change Gate Time operation will be carried out,
and the normal display will reappear.
To Next Page
Loading...
