[ATTACK] (Attack Time)
The time from when the keyboard is played until the
maximum pitch change is reached.
Higher settings will cause the pitch to change over a
longer time.
[DECAY] (Decay Time)
The time from when the maximum pitch change is
reached until the Sustain Level is reached.
Higher settings will cause the pitch to change over a
longer time.
[SUSTAIN] (Sustain Level)
The pitch that will be held.
Positive (+) settings will make the pitch higher than
the normal pitch. Negative (-) settings will make the
pitch lower than the normal pitch.
[RELEASE] (Release Time)
The time from when the keyboard is released until the
pitch returns to the normal pitch.
Higher settings will cause the pitch to change over a
longer time.
Specifying the envelope depth (Pitch
Envelope Depth)
Here’s how you can adjust the depth of the Pitch
Envelope.
1. In the REALTIME MODIFY section, press [FIL-
TER/AMP/PITCH] several times to make the
PITCH indicator light.
2. Press [ENVELOPE/LFO1/EFFECTS] several
times to make the ENVELOPE indicator
light.
3. Use the [DEPTH] knob to adjust the Pitch
Envelope Depth.
fig.6-11 (#MC fig.3-107)
Range: -12–+12
The pitch change will increase as the knob is rotated
further toward the right of center. Rotating the knob
toward the left of center will invert the shape of the
envelope, and the pitch change will increase as the
knob is rotated further left.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
With both the PITCH and ENVELOPE indicators lit,
hold down [ENVELOPE/LFO1/EFFECTS], and use
[INC] [DEC] or the [VALUE] dial to set the Pitch
Envelope Depth.
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
To Next Page
Loading...
