Type (Filter Type)
This is the setting page for “Selecting the type of filter
(Filter Type)” (p. 90).
Cutoff (Cutoff Frequency)
This is the setting page for “Brightening the sound
(Cutoff Frequency)” (p. 90).
Resonance
This is the setting page for “Adding a distinctive char-
acter to the sound (Resonance)” (p. 91).
Reso Velo (Resonance Velocity Sensitivity)
Specifies how resonance depth will be affected by
your playing dynamics on the keyboard.
Range: -100–+150
With positive (+) settings, playing the keyboard more
strongly will cause the change to be greater. With neg-
ative (-) settings, playing the keyboard more strongly
will cause the change to be less.
Env Depth (Filter Envelope Depth)
This is the setting page for “Specifying the depth of
the envelope (Filter Envelope Depth)” (p. 92).
Velo Sens (Filter Envelope Velocity
Sensitivity)
Specifies how the force of your playing on the key-
board will affect the filter envelope.
Range: -100–+150
With positive (+) settings, the tone will change more
as you play more strongly on the keyboard. With neg-
ative (-) settings, the tone will change less as you play
more strongly on the keyboard.
If you wish to change the loudness of the notes
played on the keyboard...
☞ “Changing the Loudness of Notes Played on
the Keyboard (Keyboard Velocity)” (p. 163)
Velo Time (Filter Envelope Velocity
Time Sensitivity)
Specifies how the dynamics of your playing on the
keyboard will affect the overall time of the entire filter
envelope.
Range: -100–+100
With positive (+) settings, the filter envelope times will
become faster as you play the keyboard more strongly.
With negative (-) settings, the filter envelope times will
become slower as you play the keyboard more strong-
ly.
The four front panel knobs [ATTACK] / [DECAY] /
[SUSTAIN] / [RELEASE] can be used to set the most
commonly-used parameters of the filter envelope, but
the JX-305 also allows you to make more detailed filter
envelope settings.
fig.5-38TEXT (=MC fig.3-117)
To Next Page
Loading...
