Roland V-1HD+ - 7: DSK Menu Options

49
Menu List
7: DSK
Menu item Value (bold text: default value) Explanation
DSK PVW OFF, ON
Turns the preview output of the DSK compositing result on/o.
If “DSK PVW” function is assigned to the [DSK PVW] button, you can also switch this
by pressing the button.
DSK OFF, ON
Turns DSK composition on/o.
If “DSK ON” function is assigned to the [DSK ON] button, you can also switch this by
pressing the button.
KEY SOURCE HDMI 1–4, STILL 1–4
Species the source of the logo or video that is overlaid when using DSK
compositing.
KEY TYPE
Species the DSK type used during DSK composition.
LUMINANCE-WHITE
Composite using luminance key.
Makes white portions transparent according to brightness.
LUMINANCE-BLACK
Composite using luminance key.
Makes black portions transparent according to brightness.
CHROMA
Composite using chroma key.
Makes the specied key color transparent according to hue.
KEY LEVEL 0–64–255 Adjusts the degree of extraction (transparency) for the key.
KEY GAIN 0–255 Adjusts the degree of edge blur (semi-transmissive region) for the key.
MIX LEVEL 0–255 Adjusts the key’s overall density (output level).
CHROMA Make detailed settings for chroma key.
COLOR (*10) GREEN, BLUE
Species green or blue as the key color (the color to be removed). If you want a
color other than green or blue to turn transparent, use “SAMPLING MARKER” to
specify the key color.
HUE WIDTH (*10) -30–0–30 Adjusts the hue width for the key color.
HUE FINE (*10) 0–240–360 Adjusts the center position of the hue for the key color.
SATURATION WIDTH (*10) -128–0–127 Adjusts the saturation width for the key color.
SATURATION FINE (*10) 0–255 Adjusts the center position of saturation for the key color.
SAMPLING MARKER (*10) OFF, ON
If this is “ON,” a sampling marker (
) is shown on the preview output video for
you to sample (detect) the key color.
When you execute sampling, the setting automatically turns “OFF.”
POSITION H (*11) -50–0–50% Adjusts the horizontal position of the sampling marker.
POSITION V (*11) -50–0–50% Adjusts the vertical position of the sampling marker.
SAMPLING EXECUTE (*11) EXEC
Executes key color sampling.
The “HUE WIDTH,” “HUE FINE,” “SATURATION WIDTH,” and “SATURATION FINE”
settings are adjusted automatically.
FILL TYPE BUS, MATTE
If this is “MATTE,” the superimposed logo or video is lled-in with the specied color
when using key compositing. The ll-in color is specied by “MATTE COLOR” below.
MATTE COLOR (*12)
WHITE, YELLOW, CYAN, GREEN,
MAGENTA, RED, BLUE, BLACK
Species the color used when lling-in the superimposed logo or video.
EDGE TYPE
OFF, BORDER, DROP, SHADOW,
OUTLINE
Species the type of edge applied to the superimposed logo or video.
EDGE COLOR
WHITE, YELLOW, CYAN, GREEN,
MAGENTA, RED, BLUE, BLACK
Species the color of the edge applied to the superimposed logo or video.
EDGE WIDTH 0–3–14 Species the width of the edge applied to the superimposed logo or video.
(*10) This can be set if “KEY TYPE” is “CHROMA.”
(*11) This can be set if “SAMPLING MARKER” is “ON.”
(*12) This can be set if “FILL TYPE” is “MATTE.”