Roland V-1HD+ - 17: SYSTEM Menu Options (continued)

60
Menu List
Menu item Value (bold text: default value) Explanation
AUDIO LEVEL METER OFF, ON Species whether to display the audio level meter in the multi-view.
AUDIO IN/LINE IN OFF, LOWER, UPPER
Species the position of the level meter for audio input from the audio jacks.
When this is “OFF,” the level meter is always hidden.
MULTI-VIEW LABEL OFF, ON Species whether to display the label in the multi-view.
MULTI-VIEW LABEL EDIT HDMI 1-4, STILL 1-4
Edit the label name shown in the multi-view.
Press the [VALUE] knob to access the LABEL EDIT screen.
MULTI-VIEW LAYOUT
Species the screen layout of the PVW section and PGM section shown in the multi-view.
PVW.PGM PGM.PVW BLACK.PGM PGM.BLACK
PVW PGM PGM PVW
PGM
The PVW section is not shown.
PGM
The PVW section is not shown.
OUTPUT 2 OSD
ENTER Displays the OUTPUT 2 OSD menu.
Species what is displayed for multi-view output sent through the OUTPUT 2 connector.
Menu item Value (bold text: default value) Explanation
TALLY FRAME OFF, ON
Species whether to display the tally frame or not in the
multi-view.
LABEL/LEVEL METER/MARK OFF, ON
Species whether to display the label, audio level meter and
REC indicator in the multi-view.
AUTO INPUT DETECT OFF, ON
Turns the auto input detect function on/o.
If this is “ON,” input is automatically detected, and the video is switched when input from the nal
output video is interrupted.
AUTO OFF OFF, ON
Turns the Auto O function on/o.
If this is “ON,” the power to the unit turns o automatically when all of the following states persist
for 240 minutes.
5 No operation performed on the unit
5 No audio or video input
5 No equipment is connected to the OUTPUT 1 and 2 connectors
TEST PATTERN
OFF, 75% COLOR BAR,
100% COLOR BAR, RAMP,
STEP, HATCH
Species the test pattern.
TEST TONE
OFF, -20dB@1kHz,
-10dB@1kHz, 0dB@1kHz,
20dB@1kHz:500Hz,
-10dB@1kHz:500Hz,
0dB@1kHz:500Hz
Species the test tone.
VIDEO FADER CALIBRATE ENTER
Displays the VIDEO FADER SET screen.
Following the instructions on the screen, calibrate (adjust) the video fader.
In some cases, because of continued use or transport, the video output might not reach 100%
even if you slide the video fader all the way to the left or right. Execute video fader calibration in
this case as well.
FACTORY RESET EXEC Returns the unit to its factory defaults.
VERSION — Displays the version of the system program.