Roland V-Drums TD-20X - Page 107

107
Chapter 8. Trigger Settings for Each Pad [TRIGGER]
5.
Use the [CURSOR] buttons, [-] [+] buttons, and
[VALUE] dial to specify the copy-source and copy-
destination.
If you selected [F3 (CARD)] in step 4, select the copy-source
backup number.
6.
Press the [F4 (EXCHNG)] or [F5 (COPY)] button.
If you selected [F1 (USER)] in step 4, you can exchange the
copy-source and copy-destination by pressing the [F4
(EXCHNG)] button.
Press the [F5 (COPY)] button to execute the copy.
A confirmation message will appear.
(Example: Copying a trigger bank from a CompactFlash card)
fig.08-Confirm_70
If you decide to cancel the copy or exchange, press the [F1
(CANCEL)] button.
7.
Press the [F5 (EXECUTE)] button to execute.
TD-20X_e.book 107 ページ ２００９年６月８日 月曜日 午後３時５０分