Roland V-Drums TD-20X - Other Settings [F4 (OPTION)]

112
Chapter 9. Settings for the Entire TD-20X [SETUP]
Functions that can be assigned only if “Function”
is set to “USER”
• If you don’t want sound from the pad used as a pad
switch, press the [MIXER] button and then press the [F1
(VOLUME)] button, and set the volume level for AUX4
and/or AUX3 to “0” (p. 56). Or press the [INST] button
and select “561 Off” for AUX4 and/or AUX3 (p. 46).
• When using pad switches to switch kits in a Drum Kit
Chain (p. 43), FUNCTION should be set to “KIT SELECT 1”
or “KIT SELECT 2,” and you need to press the [CHAIN]
button, so its indicator is lit. (The Drum Kit Chain
settings need to be made beforehand.)
4.
Press the [EXIT] button to return to the “SETUP”
screen.
Here, the [PREVIEW] button velocity can be set.
1.
In the “SETUP” screen (p. 108), press the [F4
(OPTION)] button.
2.
Press the [F1 (PREVIEW)] button.
The “PREVIEW” screen appears.
fig.09-008-preview.eps_70
The graph in the right side of the screen is a “velocity
monitor” that shows the force (velocity) of your strike.
3.
Use the [CURSOR (up/down)] buttons to select the
parameter.
4.
Use the [-] [+] buttons or the [VALUE] dial to make
settings.
5.
Press the [EXIT] button to return to the “SETUP”
screen.
You can specify which is used for the master comp/EQ (p. 65),
individual settings for each drum kit or common settings to
all kits.
1.
In the “SETUP” screen (p. 108), press the [F4
(OPTION)] button.
2.
Press the [F2 (COMP/EQ)] button.
The “MASTER COMP/EQ MODE” screen appears.
fig.09-009-comp.eps_70
3.
Use the [-] [+] buttons or the [VALUE] dial to make
settings.
When this is set to “GLOBAL,” “GLOBAL” appears on the icon
at the left part of the master comp/EQ setting screen.
fig.10-Master2_70
4.
Press the [EXIT] button to return to the “SETUP”
screen.
Indication Description
XSTICK SW
Switches to use/not use cross stick (p. 41).
Other Settings [F4 (OPTION)]
Specifying the Preview Velocity
[F1 (PREVIEW)]
Parameter
Value Description
Dynamics
OFF
No velocity. Level is fixed.
ON Button responds to velocity.
Velocity 1–127
Velocity when Dynamics is set
to “OFF.”
Making the Master Comp/EQ Settings
Identical for All Kits [F2 (COMP/EQ)]
Parameter
Value Description
Master
Comp/EQ
EACH KIT
Master comp/EQ for each kit,
individually.
GLOBAL
Master comp/EQ common to
other drum kits is used.
TD-20X_e.book 112 ページ ２００９年６月８日 月曜日 午後３時５０分