Roland V-Drums TD-20X - Applying Effects to the Sound (Multi-Effects) [MULTI EFFECTS]; Auditioning the Multi-Effects [F5 (AMB MON)]

62
Chapter 4. Effect Settings
The multi-effects allow you to further customize your sound
and also provides a choice of output configurations.
1.
Press the [MULTI EFFECTS] button.
The [MULTI EFFECTS] button lights.
fig.04-008-mfx.eps_70
2.
Use the [F2]–[F4] and [CURSOR] buttons to select
the parameter.
3.
Use the [-] [+] buttons or the [VALUE] dial to adjust
the setting.
Pressing the [F5 (H & R)] button in the [F4 (MFX SND)]
setting screen, you can choose to set the head and rim
simultaneously or individually.
Turning the multi-effects switch on/off
1.
Press the [MULTI EFFECTS] button.
The [MULTI EFFECTS] button will light.
2.
Press the [F1] button to turn multi-effects on/off.
This is the same setting as turning multi-effects on/off in the
“EFFECTS SWITCH” screen (p. 58).
In the multi-effects edit screen, pressing the [F5 (MFX MON)]
button will cause the MASTER OUT jacks and PHONES jack to
output only the sound with multi-effects applied. This is a
convenient way to audition the effect while you edit the
settings.
You can use this while setting the [F2 (MFX)] or [F3 (OUTPUT)]
button.
This is a temporary function that works only in the multi-
effects edit screen. It will automatically be defeated
when you access a different screen.
Applying Effects to the Sound
(Multi-Effects) [MULTI EFFECTS]
Parameter Value Description
[F2 (MFX)] button
Type
REVERB,
GATE REVERB,
DELAY,
PANNING DELAY,
BEAT DELAY,
FLANGER,
PHASER,
CHORUS,
ENHANCER,
PITCH SHIFT,
OVERDRIVE,
DISTORTION,
LO-FI,
RING MOD
Type of multi-effects
Level 0–127
Total effect level
[F3 (OUTPUT)] button
OutGain
(dB)
0, +6
Boosts the volume of the
effect.
[F4 (MFX SND)] button
Send Level
0–127
Effect send level for each
instrument
Auditioning the Multi-Effects
[F5 (AMB MON)]
TD-20X_e.book 62 ページ ２００９年６月８日 月曜日 午後３時５０分