91
Chapter 7. Using CompactFlash Cards [CARD]
You can use a CompactFlash card to do the following.
• Save (back up) 99 sets of the settings in user memory.
• Save 100 patterns (separately from the backups).
• Load backup data from a CompactFlash card into the TD-20X,
or copy specified settings such as drum kits or instruments
into user memory.
• Drum kits that you backed-up on a CompactFlash card can be
played without loading them into the TD-20X (Kit Selection:
p. 121).
• Backups you saved on the TD-20 can be imported into the
TD-20X and used.
1.
Insert a CompactFlash card into the CompactFlash
card slot on the TD-20X’s front panel.
2.
Press the [CARD] button.
The [CARD] button and the CompactFlash indicator light, and
the “CARD A” screen appears.
fig.07-001-card-a.eps_70
fig.07-002-card-b.eps_70
If you insert a card being used for the first time by the
TD-20X, display shows “Unformatted!” Refer to
“Formatting a CompactFlash Card [F1 (FORMAT)]” (p. 94)
and initialize it.
Save/Load and Copy Functions of the TD-20X
fig.CardImage
Using CompactFlash Cards [CARD]
• Never remove a CompactFlash card while the
CompactFlash indicator on the TD-20X’s top panel
is lit. Doing so may corrupt the unit’s data or the
data on the CompactFlash card.
• Carefully insert the CompactFlash card all the way
in—until it is firmly in place.
• Only CompactFlash cards that are designed for 3.3
V and have a capacity of 16 MB–4 GB (Type 1) can
be used with the TD-20X. Other types cannot be
used.
• If a CompactFlash card of larger than 2 GB capacity
is formatted (p. 94) on the TD-20X, it will be
formatted to 2 GB.
Function button (“CARD A” screen)
[F1 (SAVE)]
Saves the TD-20X’s data as a backup.
[F2 (LOAD)]
Loads data from the CompactFlash card
(p. 93).
[F3 (IMPORT)]
Imports TD-20 data into the TD-20X (p. 93).
[F4 (DELETE)]
Deletes data from the CompactFlash card
(p. 94).
[F5 (A<>B)]
Switches between the “CARD A” screen
and “CARD B” screen.
Function button (“CARD B” screen)
[F1 (FORMAT)]
Initializes the CompactFlash card (p. 94).
[F2 (INFO)]
Displays the usage status of the
CompactFlash card (p. 95).
[F5 (A<>B)]
Switches between the “CARD A” screen
and “CARD B” screen.
TD-20X
Setup
Percussion Set
Drum Kit
Inst
Trigger Setting
Drum Kit Chain
Pattern
CompactFlash
CompactFlash card
saved by the non-expa
TD-20
Backup 99
Backup 01
Setup
Percussion Set
Drum Kit
Inst
Trigger Setting
Drum Kit Chain
Pattern
Pattern 100
Pattern 001
Backup 8
Backup 1
COPY
LOAD
SAVE
IMPORT
Pattern
load/save
(p. 89)
TD-20X_e.book 91 ページ ２００９年６月８日 月曜日 午後３時５０分
To Next Page
Loading...
