90
Chapter 6. Recording and Editing Patterns—Sequencer
Patterns saved on a CompactFlash card can be loaded into
the TD-20X.
1.
Insert a CompactFlash card into the CompactFlash
card slot on the TD-20X’s front panel.
2.
Press the [PATTERN] button.
3.
Press the [F4 (EDIT)] button.
The “PATTERN EDIT” screen appears.
4.
Press the [F5 (CARD)] button.
The CompactFlash indicator light, and the “PATTERN CARD”
screen appears.
5.
Press the [F2 (LOAD)] button.
The “PATTERN LOAD” screen appears.
fig.06-23-ptn-cd-load.eps_70
6.
Press the [CURSOR (up)] button, and then use the
[-] [+] buttons or the [VALUE] dial to select the
backup pattern you want to load.
7.
Press the [CURSOR (down)] button, and then use
the [-] [+] buttons or the [VALUE] dial to select the
user pattern to which the backup pattern will be
copied.
8.
Press the [F5 (LOAD)] button.
The confirmation screen appears.
fig.06-24-ptn-cd-load-conf.eps_70
To cancel, press the [F1 (CANCEL)] button.
9.
Press the [F5 (EXECUTE)] button to load the
pattern.
You can delete the unneeded pattern from a CompactFlash
card.
1.
Insert a CompactFlash card into the CompactFlash
card slot on the TD-20X’s front panel.
2.
Press the [PATTERN] button.
3.
Press the [F4 (EDIT)] button.
The “PATTERN EDIT” screen appears.
4.
Press the [F5 (CARD)] button.
The CompactFlash indicator light, and the “PATTERN CARD”
screen appears.
5.
Press the [F3 (DELETE)] button.
The “PATTERN DELETE” screen appears.
fig.06-25-ptn-cd-del.eps_70
6.
Use the [-] [+] buttons or the [VALUE] dial to select
the unneeded backup pattern.
7.
Press the [F5 (DELETE)] button.
The confirmation screen appears.
fig.06-26-ptn-cd-del-conf.eps_70
To cancel, press the [F1 (CANCEL)] button.
8.
Press the [F5 (EXECUTE)] button to delete the
backup pattern.
Loading a Pattern from a
CompactFlash Card [F2 (LOAD)]
Deleting a Pattern from a
CompactFlash Card [F3 (DELETE)]
TD-20X_e.book 90 ページ ２００９年６月８日 月曜日 午後３時５０分
To Next Page
Loading...
