Roland V-Drums TD-20X - Assigning a Function to a Footswitch or Pad [F3 (CONTROL)]

110
Chapter 9. Settings for the Entire TD-20X [SETUP]
You can use a special cable (PCS-31: sold separately) to
connect two footswitches (BOSS FS-5U: sold separately), and
assign the footswitches to various functions such as
switching between drum kits or playing patterns.
fig.FootSw.e
o: Functions –: Does not function
1.
In the “SETUP” screen (p. 108), press the [F3
(CONTROL)] button.
2.
Press the [F1 (FOOT SW)] button.
The “FOOT SWITCH” screen appears.
fig.09-006-foot.eps_70
3.
Use the [-] [+] buttons or the [VALUE] dial to select
the function for footswitches.
When setting to “USER,” use the [CURSOR] buttons to move
the cursor to “SW1” or “SW2.”
Assigning a Function to a
Footswitch or Pad
[F3 (CONTROL)]
Assigning a Function to a Footswitch
[F1 (FOOT SW)]
Footswitch
SW1 SW2
FS-5U x 2 (PCS-31)
o (red plug) o (white plug)
DP-2 – o
PCS-31
(sold separately)
FS-5U
Function
Indication Description
KIT SELECT
SW1
KIT# DEC
Calls up the previous
kit.
SW2 KIT# INC
Calls up the next kit.
CHAIN
SELECT
SW1
CHAIN# DEC
Calls up the previous
drum kit chain.
SW2 CHAIN# INC
Calls up the next
drum kit chain.
PATTERN
SELECT
SW1 PTN# DEC
Calls up the previous
pattern.
SW2 PTN# INC
Calls up the next
pattern.
PATTERN
PLAY
SW1
PTN# INC
Calls up the next
pattern.
SW2 STOP/PLAY
Plays back/stops the
pattern.
FIXED HH/
STRAINER
When this
function is
selected, the
“FIX HH
STNR” icon
will appear in
the “DRUM
KIT” screen.
SW1 FIXED HH
Specifies whether
the hi-hat’s “Fixed Hi-
Hat” setting (p. 50)
will be set to “FIXED
2.”
SW2 STRAINER
Specifies whether
the snare’s “Strainer
Adj.” setting (p. 49)
will be turned “OFF.”
AMB/MFX
SW
SW1
AMBIENCE
SW
Turns the ambience
effect switch (p. 61)
on/off.
SW2 MFX SW
Turns the multi-
effect switch (p. 62)
on/off.
USER
Selects the function assigned to SW1
and SW2.
TD-20X_e.book 110 ページ ２００９年６月８日 月曜日 午後３時５０分