Roland V-Drums TD-20X - Page 49

49
Chapter 2. Instrument Settings [INST]
The edit screens for each pad
KICK
fig.02-007-kick-f1.eps_70
SNARE
fig.02-011-snare-f1.eps_70
For some instruments, “Material” and “Strainer Adj.”
cannot be edited.
You can assign the footswitch or a pad to turn off the
snare’s strainer (Strainer Adj. = OFF). Please refer to
“Assigning a Function to a Footswitch or Pad [F3
(CONTROL)]” (p. 110).
Parameter
Value Description
[F1 (SHELL)] button
Shell Depth
NORMAL,
DEEP1–2
Depth of the shell
Beater Type
FELT, WOOD,
PLASTIC
Type of beater
[F2 (HEAD)] button
Head Type
CLEAR,
COATED,
PINSTRIPE
Type of head
Head Tuning -480–+480 Tuning of the head
[F3 (MUFFLE)] button
Muffling
OFF, TAPE1–2,
BLANKET,
WEIGHT
Muffling (muting) setting
Snare Buzz OFF, 1–8 Resonance to the snare
[F4 (MIC/RES)] button
Mic Position
OUTSIDE4–1,
STANDARD,
INSIDE1–4
Tonal change caused by
microphone position
Mic Size
NORMAL,
LARGE
Emphasizes the low-
frequency portion of the
attack
Kit Resonance OFF, 1–8
Amount of resonance for
the entire drum kit
Parameter
Value Description
[F1 (SHELL)] button
Material
WOOD, STEEL,
BRASS
Material of the shell
Shell Depth 1.0”–20.0”
Depth of the shell
[F2 (HEAD)] button
Head Type
CLEAR,
COATED,
PINSTRIPE
Type of head
Head Tuning -480–+480
Tuning of the head
[F3 (MUFFLE)] button
Muffling
OFF, TAPE1–2,
DOUGHNUTS1
–2
Muffling (muting) setting
Strainer Adj.
OFF, LOOSE,
MEDIUM,
TIGHT
Tension of the strainer
(resonating cords)
[F4 (MIC/ADD)] button
Mic Position
OUTSIDE4–1,
STANDARD,
INSIDE1–4
Tonal change caused by
microphone position
Add Rim
Sound
OFF, TAMB,
909 CLAPS,
GATE HIT
Sound added to the rim
shot sound
If this is “OFF,” only the rim
shot sound will be heard.
Level -3–+3
Adjusts the volume
balance of the sound
added by “Add Rim
Sound.”
TD-20X_e.book 49 ページ ２００９年６月８日 月曜日 午後３時５０分