EasyManua.ls Logo

Roland V-Drums TD-20X - Naming a Trigger Bank [F5 (Name)]; Copying a Trigger Bank

Roland V-Drums TD-20X
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
106
Chapter 8. Trigger Settings for Each Pad [TRIGGER]
Each trigger bank can be named (up to 12 characters).
1.
In the “TRIGGER BANK” screen (p. 96), select the
trigger bank you want to name.
2.
Press the [F5 (ADVANCE)] button.
3.
Press the [F5 (NAME)] button.
The “TRIGGER BANK NAME” screen appears.
fig.08-020-name.eps_70
4.
the [CURSOR (left/right)] buttons to move the
cursor to the character to be changed.
5.
Use the [VALUE] dial, the [-] [+], or [CURSOR (up/
down)] buttons to change the character.
6.
When finished, press the [EXIT] button.
You can copy a trigger bank from preset memory or from a
CompactFlash card.
For user memory, you can rearrange the data by exchanging
the copy-source and copy-destination trigger banks.
Be aware that when you execute the copy, the contents
of the copy-destination will be overwritten.
1.
Press the [COPY] button.
The [COPY] button will light, and the “COPY A” screen will
appear.
If a CompactFlash card (p. 91) is inserted in the CompactFlash
card slot, the CompactFlash indicator will also light.
2.
Press the [F5 (A<>B<>C)] button twice to access the
“COPY C” screen.
fig.08-21-copy-c.eps_70
3.
Press the [F1 (TRIG)] button.
fig.08-22-copy.eps_70
4.
Use the [F1]–[F3] buttons to select the copy-source.
Naming a Trigger Bank
[F5 (Name)]
Function button
[F1 (INSERT)]
A blank space is inserted at the cursor
position.
[F2 (DELETE)]
Character at the cursor position is deleted.
[F3 (SPACE)]
Character at the cursor position is
replaced by a blank space.
[F4 (CHAR)]
Character at the cursor position changes
between uppercase/lowercase alphabet,
or numbers and symbols.
Copying a Trigger Bank
Function button
[F1 (USER)]
Copy from user memory.
Exchanging the copy-source and copy-
destination is possible only if the copy-source
is user memory.
[F2 (PRESET)]
Copy from preset memory.
Choose this if you want to return to the factory
settings.
[F3 (CARD)]
Copy from backup data saved on a
CompactFlash card.
Copy source
Copy destination
TD-20X_e.book 106 ページ 2009年6月8日 月曜日 午後3時50分

Table of Contents

Related product manuals