Roland V-Drums TD-20X - Choosing a Pattern [PATTERN]

70
Chapter 5. Playing Patterns—Sequencer
1.
Press the [PATTERN] button.
The [PATTERN] button lights, and the “PATTERN” screen
appears.
fig.05-002-pattern.eps_70
2.
Use the [-] [+] buttons or the [VALUE] dial to select
the pattern.
If you press the [F5 (NEW)] button, an empty pattern
with the lowest number is called up.
fig.05-003-pattern.eps_70
When you have finished making the settings, press the
[PATTERN] button to bring up the “PATTERN” screen.
This prevents data from being overwritten inadvertently
during performance.
Here you can select patterns from a list of pattern names.
Pattern number, pattern name, beat, measure length, pattern
playback type, and tempo are displayed.
1. Press the [PATTERN] button.
The “PATTERN” screen appears.
2.
Press the [F1 (LIST)] button.
The “PATTERN LIST” screen appears.
fig.05-004-ptn-list.eps_70
3. Use the [VALUE] dial, the [-] [+], or [CURSOR (up/
down)] buttons to select the pattern.
4.
Press the [EXIT] button to return to the “PATTERN”
screen.
Choosing a Pattern [PATTERN]
About the “PATTERN” screen
A
Pattern
Number
Currently selected pattern number.
B
Pattern
Name
The name of the currently selected pattern.
C
Pattern
Type
“P” is displayed for preset patterns, and “U” is
displayed for user patterns. When choosing
an empty pattern, an asterisk (*) appears.
D Pattern Playback Type (p. 78)
E
Measure
Number
Playback begins from the measure indicated
here when the [PLAY] button is pressed.
F Beat
G Part Mute Status (p. 71)
Function button
[F1 (LIST)]
View the pattern list.
[F2 (PART)]
Make settings for each part of the pattern (p. 71).
[F3 (FUNC)] Make settings for a user pattern (p. 77).
[F4 (EDIT)] Edit a user pattern (p. 85).
[F5 (NEW)]
Select an empty pattern (p. 83). Use this when
you want to record a new pattern.
F
E
G
CABD
Selecting a Pattern from the List
[F1 (LIST)]
Function button
[F1 ( ▲ PAGE)]
The previous page of the list appears.
[F2 (PAGE ▼ )] The next page of the list appears.
[F4 (PRE<>USR)]
Switches between preset patterns and user
patterns.
[F5 (NEW)]
An empty pattern with the lowest number is
called up.
TD-20X_e.book 70 ページ ２００９年６月８日 月曜日 午後３時５０分