Roland V-Drums TD-20X - Loading Data from a CompactFlash Card [F2 (LOAD)]

93
Chapter 7. Using CompactFlash Cards [CARD]
Data saved on a CompactFlash card can be loaded into the
TD-20X.
You can also load data from a TD-20 that has a TDW-20
installed.
1.
Insert the CompactFlash card into the
CompactFlash card slot on the TD-20X’s front
panel.
2.
Press the [CARD] button.
The [CARD] button and the CompactFlash indicator light, and
the “CARD A” screen appears.
3.
Press the [F2 (LOAD)] button.
The “CARD LOAD” screen appears.
fig.07-006-card-load.eps_70
4. Use the [-] [+] buttons or the [VALUE] dial to select
the backup area containing the data you want to
load.
5.
Press the [F5 (LOAD)] button.
The confirmation screen appears.
fig.07-007-card-load-conf.eps_70
To cancel, press the [F1 (CANCEL)] button.
6.
Press the [F5 (EXECUTE)] button to load the data.
• You can also load individual drum kits, percussion sets,
etc. from a CompactFlash card. To do so, use the Copy
function (p. 42, p. 75).
• You can audition the drum kits saved on a
CompactFlash card before loading data from the
CompactFlash card. For details, refer to “Playing a Kit
from the CompactFlash without Loading It (Kit
Selection) [F1 (KIT SEL)]” (p. 121).
Data that was backed up by the (non-expanded) TD-20 can
be imported into the TD-20X and used.
1.
Insert the CompactFlash card containing data
saved by the TD-20 into the TD-20X’s front panel
CompactFlash slot.
2.
Press the [CARD] button.
The [CARD] button and the CompactFlash indicator light, and
the “CARD A” screen appears.
3.
Press the [F3 (IMPORT)] button.
4.
Use the [-] [+] buttons and [VALUE] dial to select the
backup that you want to import.
fig.07-008-card-import.eps_70
5.
Press the [F5 (IMPORT)] button.
The confirmation screen appears.
fig.07-009-card-import-conf.eps_70
To cancel, press the [F1 (CANCEL)] button.
6.
Press the [F5 (EXECUTE)] button; the data will be
imported from the card.
Drum kits backed up by the TD-20 will be loaded into
drum kit numbers 51–100. The TDW-20’s preset kits will
be loaded into drum kit numbers 1–50. The program
change numbers specified for the drum kits will return
to their initial values.
Loading Data from a
CompactFlash Card [F2 (LOAD)]
Loading TD-20 Backup Data
[F3 (IMPORT)]
TD-20X_e.book 93 ページ ２００９年６月８日 月曜日 午後３時５０分