43
Chapter 1. Drum Kit Settings [KIT]
“Drum Kit Chain” allows you to step through the drum kits of
your choice and in the order you want. The TD-20X lets you
create and store 16 different chains of up to 32 steps each.
You can specify the order in which you’ll be using drum kits
in your live performance; this makes it easy for you to step
through them as desired.
fig.11-001e
1.
Press the [CHAIN] button to switch drum kit chain
on.
The [CHAIN] button lights, and the “DRUM KIT CHAIN” screen
appears.
fig.01-018-chain-on.eps_70
2.
Press the [F1 (C_EDIT)] button.
The “CHAIN EDIT” screen appears.
fig.01-019-cain-edit.eps_70
3.
Press the [CURSOR (left)] button to move the cursor
to the chain number.
4.
Use the [-] [+] buttons or the [VALUE] dial to select
the chain number.
5.
Press the [CURSOR (right)] button to move the
cursor to the step (the order in which the drum kits
will be selected) in the right area of the display.
6.
Use the [CURSOR (up/down)] buttons to select the
step.
7.
Use the [-] [+] buttons or the [VALUE] dial to select
the drum kit.
8.
Repeat steps 6 and 7 to create the drum kit chain.
fig.01-020-chain-edit.eps_70
9.
Press the [EXIT] button.
The “DRUM KIT CHAIN” screen appears.
Specifying the Order in Which
Drum Kits will be Recalled
[CHAIN]
Creating a Drum Kit Chain
Function button
[F1 (C EDIT)]
Create, modify, or rename a drum kit chain.
[F2 (FUNC)]
Edit the settings of each drum kit (p. 40).
[F3 (NAME)]
Rename a drum kit (p. 41).
[F5 (XSTICK)]
Specify whether cross-stick technique will
be enabled (p. 41).
Chain 1 Kit
7
Kit
2
Kit
5
Kit
10
Chain 2
Chain 16
32 steps
Function button
[F1 (INSERT)]
A step with the same kit is inserted at the cursor
position, and steps after this point are moved
back one place.
[F2 (DELETE)]
Step at the cursor position is deleted, and steps
after this point are moved forward one place.
[F5 (NAME)]
You can name a drum kit chain (p. 44).
Chain number Steps
TD-20X_e.book 43 ページ ２００９年６月８日 月曜日 午後３時５０分
To Next Page
Loading...
