77
Chapter 5. Playing Patterns—Sequencer
Set the amount of reverb and chorus for each backing part.
1.
In the “PATTERN PART” screen (p. 71), press the [F5
(REV/CHO)] button.
The “REVERB/CHORUS” screen appears.
fig.05-025-back-fx.eps_70
2.
Press the [F2]–[F4] buttons to select the parameter.
3.
Use the [CURSOR] buttons to select the parameter.
4.
Use the [-] [+] buttons or the [VALUE] dial to make
settings.
5.
Press the [F1] and/or [F5] buttons to turn the
reverb/chorus ON or OFF.
6.
Press the [EXIT] button to return to the “PATTERN
PART” screen.
Set various settings for a user pattern.
If a preset pattern is selected, you won’t be able to
change. Unavailable editing icons are shown as “
”.
1.
Press the [PATTERN] button.
The “PATTERN” screen appears.
2.
Press the [F3 (FUNC)] button.
3.
Press the [F1 (SETUP)] button.
The “PATTERN SETUP” screen appears.
fig.05-026-ptn-setup.eps_70
4.
Use the [CURSOR] buttons to select the parameter.
5.
Use the [-] [+] buttons or the [VALUE] dial to make
settings.
“Time Signature” can be set on an empty pattern. You
cannot set 1/8 and 1/16-3/16.
Applying Reverb/Chorus to the Backing
Parts [F5 (REV/CHO)]
Parameter
Value Description
[F2 (REV/CHO)] button
REVERB
Type
ROOM1,
ROOM2,
STAGE1,
STAGE2,
HALL1,
HALL2,
DELAY,
PAN-DELAY
Type of reverb
Time
0–127 Reverb length/delay time
CHORUS
Type
TYPE1–3
Type of chorus
Rate
1–64
Speed of modulation
Depth
1–64
Depth of modulation
[F3 (REV SND)] button
PART
REVERB
SEND
LEVEL
0–127
Amount of reverb applied to
each part
[F4 (CHO SND)] button
PART
CHORUS
SEND
LEVEL
0–127
Amount of chorus applied
to each part
Function button
[F1]
Reverb On/Off
[F5]
Chorus On/Off
Making Settings for a User
Pattern [F3 (FUNC)]
Specifying the Number of Measures,
Time Signature, and Tempo
[F1 (SETUP)]
Parameter
Value Description
Pattern
Length
1–999 Number of measures
Time
Signature
Numerator: 1–15
Denominator:
2, 4, 8, 16
Beat
Tempo
20–260 –
TD-20X_e.book 77 ページ ２００９年６月８日 月曜日 午後３時５０分
To Next Page
Loading...
