28
Overview
Saving your settings
Every time you change a value during the editing process, it’s
automatically stored in the TD-20X’s memory. There’s no
“write/save” process.
Moving the cursor ([CURSOR] buttons)
fig.00-001e_70
Cursor refers to the highlighted characters indicating an on-
screen parameter that can be set. When there is more than
one possibility within the screen, use the [CURSOR] buttons
to move it.
fig.00-002_50
Changing data values
([-] [+] buttons/[VALUE] dial)
fig.00-004_40
The [-] and [+] buttons and the [VALUE] dial are both used to
change the values of settings. Both methods have
advantages.
[-] [+] buttons
• Each time the [+] button is pressed, the value increases. Each
time the [-] button is pressed, the value decreases. This is
convenient for fine adjustments.
• When making an on/off setting, the [+] button will turn the
setting on and the [-] button will turn it off.
• If you hold down the [+] button and press the [-] button, the
value will increase rapidly. If you hold down the [-] button
and press the [+] button, the value will decrease rapidly.
• If you hold down the [SHIFT] button and press the [-] or [+]
button, the value will change even more rapidly.
[VALUE] dial
The dial allows you to make quick changes to the value.
• If you hold down the [SHIFT] button and turn the [VALUE]
dial, the value will change even more rapidly.
Selecting a function to edit
(Function buttons)
fig.00-003_50
The [F1]–[F5] buttons are called “function buttons.” The
bottom part of the display will show the names of the
functions available for the [F1]–[F5] buttons. For example, if
this owner’s manual makes reference to the [F2 (EDIT)]
button, press [F2] button (in this case, “EDIT” is displayed
above the [F2] button).
Basic Operation
Changing a Value
Cursor
TD-20X_e.book 28 ページ ２００９年６月８日 月曜日 午後３時５０分
To Next Page
Loading...
