Roland V-Drums TD-20X - Naming a Drum Kit Chain [F5 (NAME)]; Copying a Drum Kit Chain

44
Chapter 1. Drum Kit Settings [KIT]
Each chain’s name can use up to 12 characters.
1. Select the drum kit chain you want to name in the
“DRUM KIT CHAIN” screen.
2.
Press the [F1 (C EDIT)] button.
3.
Press the [F5 (NAME)] button.
The “CHAIN NAME” screen appears.
fig.01-021-chain-name.eps_70
4.
Use the [CURSOR (left/right)] buttons to move the
cursor to the character to be changed.
5.
Use the [VALUE] dial, the [-] [+], or [CURSOR (up/
down)] buttons to change the character.
6.
When you’re finished, press the [EXIT] button twice
to return to the “DRUM KIT CHAIN” screen.
You can copy a drum kit chain from preset memory or from a
CompactFlash card.
For user memory, you can rearrange the data by exchanging
the copy-source and copy-destination drum kit chains.
Be aware that when you execute the copy, the contents
of the copy-destination will be overwritten.
1.
Press the [COPY] button.
The [COPY] button will light, and the “COPY A” screen will
appear.
If a CompactFlash card (p. 91) is inserted in the CompactFlash
card slot, the CompactFlash indicator will also light.
2.
Press the [F5 (A<>B<>C)] button twice to access the
“COPY C” screen.
fig.01-022-copy-c.eps_70
3.
Press the [F2 (CHAIN)] button.
fig.01-023-chain-copy.eps_70
4.
Use the [F1]–[F3] buttons to select the copy-source.
Naming a Drum Kit Chain [F5 (NAME)]
Function button
[F1 (INSERT)]
A blank space is inserted at the cursor position,
and characters after this point are moved to the
right one space.
[F2 (DELETE)]
Character at the cursor position is deleted, and
characters after this point are moved to the left
one space.
[F3 (SPACE)]
Character at the cursor position is replaced by
a blank space.
[F4 (CHAR)]
Type of character at the cursor position
changes between upper case/lowercase
alphabet, or numbers and symbols.
Copying a Drum Kit Chain
Function button
[F1 (USER)]
Copy from user memory.
Exchanging the copy-source and copy-
destination is possible only if the copy-source
is user memory.
[F2 (PRESET)]
Copy from preset memory.
All drum kit chains in preset memory are
empty.
[F3 (CARD)]
Copy from backup data saved on a
CompactFlash card.
Copy source
Copy destination
TD-20X_e.book 44 ページ ２００９年６月８日 月曜日 午後３時５０分