Roland V-Drums TD-20X - Naming a Pattern [F5 (NAME)]; Specifying the Tempo [TEMPO]

79
Chapter 5. Playing Patterns—Sequencer
Each pattern can be named (up to 12 characters).
1. Press the [PATTERN] button.
The “PATTERN” screen appears.
2.
Press the [F3 (FUNC)] button.
3.
Press the [F5 (NAME)] button.
The “PATTERN NAME” screen appears.
fig.05-028-name.eps_70
4. Use the [CURSOR (left/right)] buttons to move the
cursor to the character to be changed.
5.
Use the [VALUE] dial, the [-] [+], or [CURSOR (up/
down)] buttons to change the character.
6.
Press the [EXIT] button to return to the “PATTERN”
screen.
1.
Press the [TEMPO] button.
The [TEMPO] button lights, and the “TEMPO” screen appears.
fig.05-029-tempo.eps_70
2.
Use the [-] [+] buttons or the [VALUE] dial to select
the tempo.
3.
Press the [EXIT] button to return to the “DRUM KIT”
screen.
Naming a Pattern [F5 (NAME)]
Function button
[F1 (INSERT)]
A blank space is inserted at the cursor
position.
[F2 (DELETE)] Character at the cursor position is deleted.
[F3 (SPACE)]
Character at cursor position is replaced by
a blank space.
[F4 (CHAR)]
Character at the cursor position changes
between upper case/lowercase alphabet,
or numbers and symbols.
Specifying the Tempo [TEMPO]
Function button
[F1 (CLICK)]
Make click settings (p. 81).
[F2 (SYNC)]
Specify synchronization with external MIDI
devices (p. 80).
[F3 (TAP)]
Specify the tempo by striking a pad or button
(p. 80).
[F4]
Make the [TEMPO] button blink in time with
the tempo (p. 81).
[F5] Sound the click (p. 81).
TD-20X_e.book 79 ページ ２００９年６月８日 月曜日 午後３時５０分