Roland V-Drums TD-20X - Saving Data to a CompactFlash Card [F1 (SAVE)]

92
Chapter 7. Using CompactFlash Cards [CARD]
All user memory data (p. 31) will be saved up to 99 sets.
1.
Insert a CompactFlash card into the CompactFlash
card slot on the TD-20X’s front panel.
2.
Press the [CARD] button.
The [CARD] button and the CompactFlash indicator light, and
the “CARD A” screen appears.
If you insert a card being used for the first time by the
TD-20X, display shows “Unformatted!” Refer to
“Formatting a CompactFlash Card [F1 (FORMAT)]” (p. 94)
and initialize it.
3.
Press the [F1 (SAVE)] button.
The “CARD SAVE” screen appears.
fig.07-003-card-save.eps_70
4.
Use the [-] [+] buttons or the [VALUE] dial to select a
backup number to which you want to save the data.
You can select an empty backup area with the lowest
number by pressing the [F4 (NEW)] button.
5.
Press the [F5 (SAVE)] button.
The confirmation screen appears.
fig.07-004-card-save-conf.eps_70
To cancel, press the [F1 (CANCEL)] button.
6.
If you want to change the name of the backup area,
press the [F4 (NAME)] button.
7.
Press the [F5 (EXECUTE)] button to save the data.
Each backup area can be given a name of up to 12 characters.
1. In the “CARD SAVE” confirmation screen, press the
[F4 (NAME)] button.
The “CARD SAVE NAME” screen appears.
fig.07-005-card-name.eps_70
2.
Use the [CURSOR (left/right)] buttons to move the
cursor to the character to be changed.
3. Use the [VALUE] dial, the [-] [+], or [CURSOR (up/
down)] buttons to change the character.
4.
When you’re finished, press the [F5 (SAVE)] button
to return to the confirmation screen.
Saving Data to a CompactFlash
Card [F1 (SAVE)]
Naming a Backup [F4 (NAME)]
Function button
[F1 (INSERT)]
A blank space is inserted at the cursor
position, and characters after this point are
moved to the right one space.
[F2 (DELETE)]
Character at the cursor position is deleted,
and characters after this point are moved
to the left one space.
[F3 (SPACE)]
Character at the cursor position is replaced
by a blank space.
[F4 (CHAR)]
Type of character at the cursor position
changes between upper case/lowercase
alphabet, or numbers and symbols.
[F5 (SAVE)] Pressed to save the data.
TD-20X_e.book 92 ページ ２００９年６月８日 月曜日 午後３時５０分