Roland V-Drums TD-20X - Making Settings for Each Drum Kit [F2 (FUNC)]

40
Chapter 1. Drum Kit Settings [KIT]
1.
Press the [KIT] button.
The “DRUM KIT” screen appears.
2.
Press the [F2 (FUNC)] button.
3.
Use the [F1]–[F5] buttons to select the setting that
you want to make.
4.
Use the [CURSOR (up/down)] button to select a
parameter.
5.
Use the [-] [+] buttons or [VALUE] dial to specify the
value.
6. Press the [EXIT] button to return to the previous screen.
fig.01-004-kitvol.eps_70
When you select a drum kit of which Kit Tempo is set to “ON,”
the tempo you define here will be set automatically.
fig.01-005-kittempo.eps_70
When you select a kit of which “Kit Tempo” is set to
“ON,” the defined tempo appears in the upper right of
the “DRUM KIT” screen.
fig.01-006-kittempo-on.eps_70
In each kit, you can choose whether sticks or brushes will be
used.
fig.01-007-brush.eps_70
When “Brush Switch” is set to “ON,” the brush icon
appears in the “DRUM KIT” screen.
fig.01-008-brush-on.eps_70
This function allows you to turning the Pad Pattern function
on/off.
For more about the Pad Pattern function, refer to “Playing a
Pattern by Hitting a Pad (Pad Pattern) [F1 (PATTERN)]” (p. 52).
fig.01-009-padptn.eps_70
Making Settings for Each Drum
Kit [F2 (FUNC)]
Adjusting the Volume [F1 (VOLUME)]
Parameter
Value Description
Kit Volume
0–127
Volume of the entire drum kit
Pedal HH Volume 0–127
Volume of the hi-hat’s foot
closed sound
XStick Volume 0–127
Volume of cross stick sound
Assigning a Tempo for Each Kit
[F2 (TEMPO)]
Parameter
Value Description
Kit Tempo
OFF
Tempo is not defined
ON Tempo is defined
Tempo 20–260
Defined tempo
Playing Brushes [F3 (BRUSH)]
Parameter
Value Description
Brush Switch
OFF
For using sticks
ON For using brushes
Turning the Pad Pattern Function On/
Off [F4 (PAD PTN)]
TD-20X_e.book 40 ページ ２００９年６月８日 月曜日 午後３時５０分