Roland V-Drums TD-20X - Page 50

50
Chapter 2. Instrument Settings [INST]
TOM
fig.02-015-tom-f1.eps_70
* PINSTRIPE is a registered trademark of Remo Inc., U.S.A.
HI-HAT
fig.02-019-hh-f1.eps_70
For some instruments, “Mic Position” cannot be edited.
The “Fixed Hi-Hat” position can be enabled by pressing
an optional footswitch or hitting a pad switch. Please
refer to “Assigning a Function to a Footswitch or Pad
[F3 (CONTROL)]” (p. 110).
Parameter
Value Description
[F1 (SHELL)] button
Shell Depth
NORMAL,
DEEP1–2
Depth of the shell
[F2 (HEAD)] button
Head Type
CLEAR,
COATED,
PINSTRIPE
Type of head
Head Tuning -480–+480 Tuning of the head
[F3 (MUFFLE)] button
Muffling
OFF, TAPE1–2,
FELT1–2
Muffling (muting) setting
Snare Buzz OFF, 1–8
Resonance to the snare
[F4 (MIC)] button
Mic Position
OUTSIDE4–1,
STANDARD,
INSIDE1–4
Tonal change caused by
microphone position
Parameter
Value Description
[F1 (SIZE)] button
Size
1”–40”
Hi-hat diameter
[F2 (ADD)] button
Add Sound
OFF,
TAMBOURINE,
CABASA,
COWBELL
Allows you to add
tambourine, cabasa, or
cowbell to the hi-hat. The
percussion groove will be
added to the hi-hat.
Level -3–+3
Adjusts the volume
balance of the added
sound.
[F3 (FIXED)] button
Fixed Hi-Hat
NORMAL
The openness will be
controlled by the pedal.
FIXED1–4 The openness will be fixed.
[F4 (MIC)] button
Mic Position
OUTSIDE2–1,
STANDARD,
INSIDE1–2
Tonal change caused by
microphone position
TD-20X_e.book 50 ページ ２００９年６月８日 月曜日 午後３時５０分