22
Getting Ready
Check after making connections
Kick “Sensitivity” setting
Adjust “Sensitivity” in order to take full advantage of the TD-20X’s capabilities such as the dynamic response of the kick sounds.
The “Sensitivity” setting is significantly influenced by differences in the particular pad you’re using, your kick pedal, and your
playing style.
While you watch the TD-20’s Trigger LED indication, adjust this setting so that the red LED lights only for the strongest hits.
Operation: Press the [TRIGGER] button and press the [F2 (BASIC)] button (p. 97).
Hi-hat setting
Please make the following adjustments to ensure comfortable performance.
• If you’re using the “VH-12 V-Hi-Hat,” you must adjust the hi-hat offset. This is required in order to correctly detect open/close
operation and pedal movement.
Access: See “Making Hi-hat (VH-12) Settings” (p. 25).
• “Foot Splash Sens” is also important. Try adjusting it.
Access: Press the [TRIGGER] button and press the [F3 (HI-HAT)] button (p. 99).
• “Pedal HH Volume” can be adjusted for each drum kit.
Access: Press the [KIT] button and press the [F2 (FUNC)] button and press the [F1 (VOLUME)] button (p. 40).
• The hi-hat’s bow and edge volume can be adjusted independently.
Access: Press the [MIXER] button and press the [F1 (VOLUME)] button (p. 56).
Turn the [F5 (H&R)] button off before you make adjustments.
TD-20X_e.book 22 ページ ２００９年６月８日 月曜日 午後３時５０分
To Next Page
Loading...
