EasyManua.ls Logo

Roland V-Drums TD-20X - Page 38

Roland V-Drums TD-20X
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
Overview
Playing along with a pattern
The TD-20X provides a variety of “patterns”—drum sound
and backing phrases. It’s easy to play along with these
patterns.
You can also create your own patterns (User Patterns).
For details on the procedure, refer to “Chapter 5. Playing
Patterns—Sequencer” (p. 69).
Using the Copy function
Settings such as the instrument set (with or without COMP/
EQ), ambience, multi-effect, volume, pan, and trigger settings
can be copied from preset memory or from a backup on a
CompactFlash card.
Settings for an added pad
(Trigger Parameters)
You’ll need to make trigger settings if you connect an
additional pad to the TD-20X.
Specify the model (trigger type) of the pad you’ve connected.
For details on the procedure, refer to “Selecting the Pad Type
[F1 (BANK)]” (p. 96).
Backing up data to a CompactFlash card
By using a separately sold CompactFlash card, you can save
(back up) 99 sets of the contents of user memory.
A specified drum kit or instrument can also be copied from
the backup data into user memory.
For details on the procedure, refer to “Using CompactFlash
Cards [CARD]” (p. 91).
Using a CompactFlash card drum kit without
loading it (Kit Selection)
Preset drum kits of the TD-20 or TDW-20 or backed-up drum
kits saved on a CompactFlash card can be played without
loading them. This is called the “Kit Selection” function.
This is a convenient way to perform without rewriting the
contents of user memory.
If desired, you can also copy this data to a drum kit in user
memory.
For details on the procedure, refer to “Playing a Kit from the
CompactFlash without Loading It (Kit Selection) [F1 (KIT
SEL)]” (p. 121).
Specifying a sound’s output destination
(Output Assign)
You can specify the output jack from which the sound of
each pad will be output. This is called the “Output Assign”
function.
You can also specify that only the ambience component will
be output from the MASTER OUT jacks.
For details on the procedure, refer to “Output Assignments
[F2 (OUTPUT)]” (p. 108).
Settings to copy
See page
Drum Kit
p. 42
Drum Kit Chain p. 44
Instrument
INST
p. 54
PAD COMP/EQ
Mixer
VOLUME
p. 57
PAN
Effect
AMBIENCE
p. 68
MFX
Trigger Bank p. 106
TD-20X_e.book 38 ページ 2009年6月8日 月曜日 午後3時50分

Table of Contents

Related product manuals