Roland V-Drums TD-20X - Page 74

74
Chapter 5. Playing Patterns—Sequencer
Selecting a percussion instrument from the
list [F1 (LIST)]
Here you can select from the list of all available instruments.
1.
In the “PERCUSSION SET EDIT” screen (p. 73), use
the [CURSOR (up/down)] buttons to select the note
number.
2.
Press the [F1 (LIST)] button.
The “PERCUSSION SET INST LIST” screen appears.
fig.05-015-perc-instlist.eps_70
3.
Use the [VALUE] dial, the [-] [+], or [CURSOR]
buttons to select the instrument.
4.
Press the [EXIT] button to return to the
“PERCUSSION SET EDIT” screen.
Settings the volume and pan for each
percussion instrument [F2 (EDIT)]
Set the volume, pan, pitch, decay, etc. for each percussion
instrument.
1.
In the “PERCUSSION SET EDIT” screen (p. 73), press
the [F2 (EDIT)] button.
The “PERCUSSION SET INST EDIT” screen appears.
fig.05-016-perc-note.eps_70
2.
Use the [CURSOR] buttons to select the parameter.
3.
Use the [-] [+] buttons or the [VALUE] dial to make
settings.
4.
Press the [EXIT] button to return to the
“PERCUSSION SET EDIT” screen.
Function button
[F1 (< PAGE)]
Previous page of the list appears.
[F2 (PAGE >)] The next page of the list appears.
[F5 (OFF)] Selects the instrument #561 (OFF).
Parameter
Value Description
Perc Note
0 (C -)–127 (G 9)
Note number to be set
(Inst)
Refer to “Drum
Instrument
List” (p. 131).
Instrument
Volume 0–127
–
Pan L15–CTR–R15
Stereo position
Pitch -480–+480 –
Decay Time -31–+31
–
Cho Send
Level
0–127
Amount of chorus
Rev Send
Level
0–127
Amount of reverb
CC 0–127
Specifies how the instrument
which changes the tone like a
snare (striking position) or hi-
hat (pedal position) sounds.
TD-20X_e.book 74 ページ ２００９年６月８日 月曜日 午後３時５０分