BRP-Rotax
MAINTENANCE MANUAL
Engine test run Engine test run is necessary:
Step
Procedure
1
Operate the engine until the temperatures have stabilized for a period of 5
min. (engine oil temperature between 50 to 70 °C (122 - 160 °F).
2
Switch the engine OFF.
3 Allow the engine to cool down.
4
Check for leaks.
5
Check the coolant level and top up with coolant as required.
12–10–00
Page 6
December 01 2017
Effectivity: 915 i A Series
Edition 0/Rev. 0
To Next Page
Loading...
