TS4240 User’s Guide
Getting To Know the Cash Register
This chapter shows you the basics of using your cash register after you set
it up. If you have not yet set up your cash register, see the Quick Start
sheet that came in the box with your cash register or Getting Started on
page 3.
Turning the Register Off and On
You should turn the cash register off when you are not using it. The touch
screen does not work and the cash drawer is electronically locked. A small
amount of power maintains the programming and transaction data totals.
Note
Do not turn the cash register off in the middle of a transaction. Complete all
transactions before you turn the cash register off. If the cash register is
turned off during a transaction, when the cash register is turned on again,
you see a message that the power was interrupted. Depending on the
control lock position, you may or may not see a “Transaction did not end”
message.
To turn the cash register on
1 Locate the power switch on the right side of the cash register.
2 Press the switch towards the back of the cash register to turn it ON.
To turn the cash register off
1 Locate the power switch on the right side of the cash register.
2 Press the switch towards the front of the cash register to turn it OFF.
CHAPTER 3
To Next Page
Loading...
