TS4240 User’s Guide 56
406 Options
Return to Machine to Default Settings
Returns all the Options to factory default settings. It is strongly
recommended that you run a Z-report and any other reports first, because
resetting to default settings affects these reports. After running the
Z-report, return to this option and continue with resetting to factory
default settings.
You do not need to press the Decimal key
when you ring up sales or during
programming. If you use the Decimal key
when you enter a price, you hear an error
beep and see an error message.
The only time you use the Decimal key is
when you are ringing up the quantity of a
sale. For example, 10.25 gallons of gasoline
or 1.875 pounds of deli meat.
After you are done, you can check your
results. See Running the Options Dump
Report on page 43.
Working Mode Specifies Restaurant or Retail mode. After
you select a mode, if you change modes, you
lose all programming.
Pass Code Setting Select the passcodes you want to change.
Power Saving Select the amount of time before the touch
screen turns-off and goes-to-sleep into Power
Saving mode. The cash register only “goes to
sleep” after the specified number of minutes
of no activity. It does not go to sleep in the
middle of a sales transaction.
For more information, see Using Power
Saving Mode on page 17.
Table 7 System configuration settings (continued)
Option Description
To Next Page
Loading...
